|
|
|
|
RODIX CONTROL UNIT SPECS AND INFORMATION
|
|
Click on any unit below for more information:
Rodix FC-40 Plus Series Controls are used to operate bowls, storage hoppers and inline linear feeders.
This control family is typically used on loads which run continuously, or are demand cycled by a PLC machine
control or parts sensor with built-in time delays and power supply. 120VAC models are available in 15 and
30 AMP packages; 240VAC models are available in 8 and 15 Amp packages.
|
FC-40 PLUS
|
FC-70
|
FC-71
|
FC-75
|
Rodix FC-70 Series Controls are used to operate small vibratory bowls, storage hoppers and inline linear feeders. This control family is typically used on loads that run continuously, but can be demand cycled by a PLC machine control or parts sensor which has its own built-in time delays and power supply.
|
|
Rodix FC-90 Plus Series Controls are used to operate vibratory bowls with part sensing, and storage hoppers fitted with electronic bowl level detectors. The 12VDC power supply and sensor time delays are provided by the control. The demand cycling of the bowl or hopper is controlled by the sensor's output signal processed through the time delay settings inside the FC-90.
|
FC-90 PLUS
|
FC-92 PLUS
|
|
|
PARTS FEEDERS, INC
.
|
|
|
87 Thomas Street, East Hartford, CT 06108-2054
Phone: 860-528-9579 Fax: 860-528-7430
Email: partsfeed@aol.com
|
|
|
